Acidic Ramming Mass

• 

  Acidic Ramming Mass

  Acidic Ramming Mass, also known as Silica Ramming Mass or Mix, is used in Coreless Induction Furnaces, for melting of scrap. High performance Silica Ramming Mixes (also known as Acidic Ramming Mass in generic terms), designed to minimize erosion in induction melting.

  Silica ramming mass can safely be used up to an operating temperature of 1700°C it expands very little so it is superior to both alumina and magnesia to resist thermal shocks. TMM India focuses on quality of silica ramming mass by providing particle size distribution to an optimum level, according to the furnace capacity and make,giving a high density, trouble free and consistent linings..

  Material for Ramming from TMM India

  We manufacture finest quallity of grains and powder of both quartzite and quartz for use in preperation of ramming mass, We are manufacturing these grains with strict quality adherance to provide best results.

  Quartz and Quartzite grain sizes: 12-24, 16-32, 20-40, 30-50, 30-70, 40-70

  Quartz and quartzite powder mesh size: 80-200 mesh, 300 mesh, 325 mesh, 400 mesh and above

  Clients can contact us for requirement of grains and powder for Ramming Mass.

   

  Grades of Acidic Ramming Mass as per furnance

  Grain Size: : 4 Mesh (BSS) (6 mm) and finer

  Material Required: : 134 lbs. Per cubic foot (2.30 g/cm3

  Installation Method: : Dry Ram or vibrate

  Heat Set by : Sinter @ 200 F/HR (111 C/HR) Hold @ 2912° F (1600 °C) for one hour Maximum

  Temperature recommended: : Sintering : 1200°C (2192° F)

  Application : 1700°C (3092° F)

   

  Quartzite Granules Specifications for Ramming Mass

  High content of SiO2 from 98% to 99.1%

  LOI: Less then 0.5%

  Low Fe content upto 0.4-1.5%%

  Al2O3: 0.5-1.5%

  Soda & Potash: Less then 0.1%

  Lime (CaO): Less then 0.1%

  MgO: Less then 0.1%

   

  Quartz Granules Specifications for Ramming Mass

  High content of SiO2 from 99.2% to 99.8%

  LOI: Less then 0.5%

  Low Fe content upto 0.008-0.01%%

  Al2O3: Trace

  Soda & Potash: Trace or NIL

  Lime (CaO): Less then 0.1%

  MgO: Nil

   

  Specifications of Ramming mass from TMM India: Check specifications

   

  Contact us for product inquiry.

  Contact us at info@tmmindia.com for more details and product inquiry or call us at +918619061727